Steering Cylinder Hold-Down Clamp With Steel Weld Plate And Hardware, Kit, Each
PROFORMANCE PROS | Part# PPP-6280
In Stock
Highlights:
- FITS 2.50 Bore CYLINDER
- (1) TWO PEACE CLAMP
- CLAMP MATERIAL; ALUMINUM
- Weld Plate Material : Steel
- Bottom Base To Cyl. Centerline : 2-11/16 in.
- (1) WELD PLATE (2) 1/2"-13 TAPPED HOLES
- (2) 1/2"-13 TAPPED HOLES, 4.0" C to C
- (2) BOLTS 1/2"-13 x 3.75" LONG
- (2) LOCK WASHERS 1/2" I.D.
- SOLD AS KIT
- EACH
Steering Cylinder Hold-Down Clamp, Auminum, With Steel Weld Plate and Hardware, Threaded holes accept 1/2-13 bolts and are spaced 4.0 inches center-to-center, 2.875" I.D. for 2.50" Cylinder, Each
$72.78
PPP-6280
Proformance Pros
Steering Cylinder Hold-Down Clamp, Auminum, With Steel Weld Plate and Hardware, Threaded holes accept 1/2-13 bolts and are spaced 4.0 inches center-to-center, 2.875" I.D. for 2.50" Bore Cylinder, Each
Recommended for Steering Cylinders PPP-6271, PPP-6272, PPP-6274, and PPP-6275
MUST HAVE (2) CLAMPS for each Cylinder
FITS 2.50 Bore CYLINDER
(1) TWO PEACE CLAMP
CLAMP MATERIAL; ALUMINUM
Weld Plate Material : Steel
Bottom Base To Cyl. Centerline : 2-11/16 in.
(1) WELD PLATE (2) 1/2"-13 TAPPED HOLES
(2) 1/2"-13 TAPPED HOLES, 4.0" C to C
(2) BOLTS 1/2"-13 x 3.75" LONG
(2) LOCK WASHERS 1/2" I.D.
SOLD AS KIT
EACH
Proformance Pros
Steering Cylinder Hold-Down Clamp, Auminum, With Steel Weld Plate and Hardware, Threaded holes accept 1/2-13 bolts and are spaced 4.0 inches center-to-center, 2.875" I.D. for 2.50" Bore Cylinder, Each
Recommended for Steering Cylinders PPP-6271, PPP-6272, PPP-6274, and PPP-6275
MUST HAVE (2) CLAMPS for each Cylinder
FITS 2.50 Bore CYLINDER
(1) TWO PEACE CLAMP
CLAMP MATERIAL; ALUMINUM
Weld Plate Material : Steel
Bottom Base To Cyl. Centerline : 2-11/16 in.
(1) WELD PLATE (2) 1/2"-13 TAPPED HOLES
(2) 1/2"-13 TAPPED HOLES, 4.0" C to C
(2) BOLTS 1/2"-13 x 3.75" LONG
(2) LOCK WASHERS 1/2" I.D.
SOLD AS KIT
EACH
Call Proformance Pros at (906) 639-7767 with any questions or concerns
