REA-R106-1614-10BS-4-P10
Real Wheel

Wheel, 16x14, 6x8.75 BC, 3/4" Stud, 10 in Inner Half Polished, With 4 in Outer Half, Each

Note : This Wheel Is Made With (2) Outer Wheel Shells. The Inner Will Have A Drop In It That Could Cause Interference With Your Brakes. The Deepest Backspace, With Out A Drop in The Shell (Brake Clearance), Is 9 inch.

    Spun Aluminum
    Diameter : 16 in.
    Width : 14 in.
    Inner Half : 10 in.
    Outer Half : 4 in.
    Polished Inner : Yes
    Halves Welded Together : Yes
    Bolt Pattern : (6) on 8.75" B.C.
    Stud Hole Dia. : (6) 3/4 in
    Each

Real 16" Wheel X 14" Width. This is a NON-BEADLOCK wheel.

Custom built to your specifications-we can build these wheels to fit almost any application. These wheels are manufactured from 6061-T6 aircraft structural grade aluminum. 6061 aluminum must be two-stage heat-treated and therefore is more expensive to use, but much stronger than cheaper, non heat-treatable stamping type aluminum or plastic. They are Spun Constructed! It has been proven over and over again that the only way to get a truly round wheel and maintain material thickness, is to spin it!

Steel lughole insert proven to be better than coined or countersunk lugholes. The pressed in steel lughole insert ensures that the wheel will stay tight and bolt up true. Steel inserts are only used in applications utilizing an acorn style lugnut. For 3/4" studs (typical pulling size) no insert is used and a 3/4" flanged lugnut is recommended.

All our wheels are polished to a finish that is second to none. The outer half comes polished, you need to choose if you want the inner half polished.

Repair parts & rim halves available.

Call Proformance Pros at (906) 639-7767 with any questions or concerns

Categorized under:
· Wheels and Tires » REAL » R106 6 On 8.75 Bolt Circle (3/4" Stud) » 16 in. Diameter » 14 in. Wide » 10 in. BS » POLISHED