Remote Steering Kit For NON-LOAD Reaction Steering
PROFORMANCE PROS | Part# PPP-5091-K-1
In Stock
Highlights:
- Remote Steering
- Hyd. Steering
- Valve & Body
- (2) 12 Volt Selonoid
- (2) Relays
- (4) -6 Hyd. Fittings
- (1) Switch SPDT Mom. On/Off/Mom. On
- (1) Rubber Boot
- Sold As Kit
REMOTE STEERING KIT FOR NON-LOAD REACTION STEERING, Kit
$379.94
PPPPPP-5091-K
Proformance Pros
Remote Steering or Body Lift Kit Used With Non-Load Reaction Steering Valve, Kit
This kit can be added on to an existing 12 volt hydraulic steering system. You can control the body lift or steering with a toggle switch. If you wish to have both a body lift system and a remote steering system, you will require two of these add-on kits as they are capable of operating one system per kit, or you can buy kit# PPP-5091-K-4.
This kit ties into an existing 12 volt hydraulic system to add in toggle switch control of a hydraulic solenoid valve.
This is a non load reaction unit (wheels do not return to center without manually turning the steering wheel) and can be used with all cylinder types. If you have a single rod (unbalanced) cylinder this is the style you should buy, but it will also work in double rod/cylinder applications where a return to center effect and road feedback is not desired.
This kit includes the hydraulic solenoid, relays (2), hydraulic fittings (4), SPDT switch and rubber boot for the switch.
Remote Steering
Hyd. Steering
Valve & Body
(2) 12 Volt Selonoid
(2) Relays
(4) -6 Hyd. Fittings
(1) Switch SPDT Mom. On/Off/Mom. On
(1) Rubber Boot
Sold As Kit
For furthur assistance Please call 906-639-PROS (7767)
Proformance Pros
Remote Steering or Body Lift Kit Used With Non-Load Reaction Steering Valve, Kit
This kit can be added on to an existing 12 volt hydraulic steering system. You can control the body lift or steering with a toggle switch. If you wish to have both a body lift system and a remote steering system, you will require two of these add-on kits as they are capable of operating one system per kit, or you can buy kit# PPP-5091-K-4.
This kit ties into an existing 12 volt hydraulic system to add in toggle switch control of a hydraulic solenoid valve.
This is a non load reaction unit (wheels do not return to center without manually turning the steering wheel) and can be used with all cylinder types. If you have a single rod (unbalanced) cylinder this is the style you should buy, but it will also work in double rod/cylinder applications where a return to center effect and road feedback is not desired.
This kit includes the hydraulic solenoid, relays (2), hydraulic fittings (4), SPDT switch and rubber boot for the switch.
Remote Steering
Hyd. Steering
Valve & Body
(2) 12 Volt Selonoid
(2) Relays
(4) -6 Hyd. Fittings
(1) Switch SPDT Mom. On/Off/Mom. On
(1) Rubber Boot
Sold As Kit
For furthur assistance Please call 906-639-PROS (7767)
Categorized under:
