Clutch Slave Cylinder, 7/8 In Bore, 1-3/8 In Stroke, 11-3/4 In Long, 3/8-24 In Inverted Flare Female Inlet, Pull Type, Aluminum / Steel, Kit
WILWOOD | Part# WIL-260-1333
In Stock
Highlights:
- Slave Cylinder - Product Summary
- This “Pull Type” slave cylinder is made from billet aluminum for high strength and plated with a tough anti-corrosion finish. The stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch. This slave cylinder is ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications. Recommended master cylinder sizing is ¾”.
Clutch Slave Cylinder, 7/8 in Bore, 1-3/8 in Stroke, 11-3/4 in Long, 3/8-24 in Inverted Flare Female Inlet, Pull Type, Aluminum / Steel, Kit, EACH
$112.30
CLUTCH SLAVE CYLINDER, 7/8 IN. BORE, 1-3/8 IN. STROKE, 11-3/4" IN. LONG, 3/8-24 IN. INVERTED FLARE FEMALE INLET, PULL TYPE, ALUMINUM / STEEL, KIT, EACH
REBUILD KIT : WIL-260-5524
Slave Cylinder - Product Summary
This “Pull Type” slave cylinder is made from billet aluminum for high strength and plated with a tough anti-corrosion finish. The stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch. This slave cylinder is ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications. Recommended master cylinder sizing is ¾”.
| Master Cylinder Dimensions | |
|---|---|
| Bore Size | 7/8" |
| Area (in²) | 0.440 |
| Stroke | 1.38 |
| Volume (cu in) | 0.60 |
| Master Cylinder Description | |
| Type | |
| Outlets | |
| Material | Aluminum / Steel |
| Finish | Type III Ano |
| Reservoir | |
| Res Type | |
| Res Size (oz) | |
| Res Size(cu in) | |
| Rate | |
| UPC Number | |
| UPC | 889545067170 |
| Product Documents | |
|---|---|
| Rebuild Kit | Product Data Sheet |
 |
 |
| 260-5524 | Click To Download |
Slave Cylinder - Product Summary
This “Pull Type” slave cylinder is made from billet aluminum for high strength and plated with a tough anti-corrosion finish. The stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch. This slave cylinder is ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications. Recommended master cylinder sizing is ¾”.
Wilwood Slave Cylinder Drawing 
| Additional Dimensions | |
|---|---|
| Overall Length(in) | 11.70" |
| Flange to End Length (in) | |
| Inlet Size (in) | 1/8-27 NPT |
| Inlet Fit (in) | 3/8-24 IF Female |
| Outlet Size 1 (in) | |
| Outlet Fit 1 (in) | |
| Outlet Size 2 (in) | |
| Outlet Fit 2 (in) | |
Categorized under:
