Candle Stick, Bearing Retainer1 3/8 Input, Hard Coat (4)-Bolts 3/8-16 X 3/4, Oxide, Fscs, Each
PROFORMANCE PROS | Part# PPP-5153-K
In Stock
Highlights:
- HARD COATED
- ALUMINUM
- (4) 3/8 in. THRU HOLES
- (4) 5/16-24 TAPPED HOLES
- BOLT CIRCLE IS 4.00 in.
- O.A.L. : 4.125 in.
- BEARING RETAINER SNOUT: 1.750" O.D.
- FLANGE : 4.625" O.D.
- EACH
CANDLE STICK, 1 3/8 INPUT, HC, W/ (4) 3/8"-16 X 3/4:BOLTS FSCS, ALSO DRILLED & TAPPED (4) 5/16"-24 0N 4" BC 4.125 in. LONG, 1.750 in. O.D. FOR BEARING SLIDE, EACH
$167.24
PPP-5153-K
Proformance Pros
CANDLE STICK, 1 3/8 INPUT, HC, W/ (4) 3/8"-16 X 3/4:BOLTS FSCS, ALSO DRILLED & TAPPED (4) 5/16"-24 0N 4" BC 4.125 in. LONG, 1.750 in. O.D. FOR BEARING SLIDE, EACH
This Bearing Retainer Is Machined For Snap Ring That Is On Back Bearing, When Running A Direct Mount Input Shaft, In Bellhousing.
HARD COATED
ALUMINUM
(4) 3/8 in. THRU HOLES
(4) 5/16-24 TAPPED HOLES
BOLT CIRCLE IS 4.00 in.
O.A.L. : 4.125 in.
BEARING RETAINER SNOUT: 1.750" O.D.
FLANGE : 4.625" O.D.
EACH
Proformance Pros
CANDLE STICK, 1 3/8 INPUT, HC, W/ (4) 3/8"-16 X 3/4:BOLTS FSCS, ALSO DRILLED & TAPPED (4) 5/16"-24 0N 4" BC 4.125 in. LONG, 1.750 in. O.D. FOR BEARING SLIDE, EACH
This Bearing Retainer Is Machined For Snap Ring That Is On Back Bearing, When Running A Direct Mount Input Shaft, In Bellhousing.
HARD COATED
ALUMINUM
(4) 3/8 in. THRU HOLES
(4) 5/16-24 TAPPED HOLES
BOLT CIRCLE IS 4.00 in.
O.A.L. : 4.125 in.
BEARING RETAINER SNOUT: 1.750" O.D.
FLANGE : 4.625" O.D.
EACH
Pictured above with cross shaft, fork, arm and throwout bearing,(Sold Separately) See recommended accessories above. For Assistance or Additional Information, Contact us at 906-639-PROS(7767) |
Categorized under:
