Hub Only, FDS75/85 Front, Aluminum, 6 On 8.75 Bc, Acpt. Tapered Bearings, Each
PROFORMANCE PROS | Part# PPP-5143
In Stock
Highlights:
- HUB ONLY
- BILLET ALUMINUM
- FLANGE FOR BRAKE ROTOR
- 6 ON 8.75 in. B.C.
- 3/4-16 R.H. WHEEL STUD
- ACCEPTS TAPERED BEARINGS
- EACH
HUB ONLY, FDS75/85 FRONT, ALUMINUM, 6 ON 8.75 BC, 3/4-16 STUD, ACCEPTS TAPERED BEARINGS, EACH
$678.18
PPP-5143
Proformance Pros
HUB ONLY, FDS75 / FDS90 FRONT, ALUMINUM, 6 ON 8.75 BC, 3/4-16 STUD, ACCEPTS TAPERED BEARINGS, EACH
These are designed as a direct replacement for the stock hubs commonly used on pull trucks.
The hubs are CNC machined from billet aluminum with provisions for a bolt-on disc brake rotor. This hub is designed to fit the FDS75 or FDS78 Front axle assembly. (commonly known as F106 front axle)
Hubs are now available with the option of having roller ball bearings installed. Roller bearings decrease the rolling resistance, which puts more horsepower to the ground. Options are available for steel or ceramic. Ceramic bearings have just 10% of the friction of steel, which provide even more power to the ground. No need to set the preload like with traditional bearings; with the roller bearings installed just slide the hub assembly on and tighten the spindle nut.
This hub is designed to accept the stock bearing, race, and seal if it's not purchased with ball bearings. (Sold Separately)
For Assistance or Additional Information, Contact us at 906-639-PROS (7767)
Proformance Pros
HUB ONLY, FDS75 / FDS90 FRONT, ALUMINUM, 6 ON 8.75 BC, 3/4-16 STUD, ACCEPTS TAPERED BEARINGS, EACH
These are designed as a direct replacement for the stock hubs commonly used on pull trucks.
The hubs are CNC machined from billet aluminum with provisions for a bolt-on disc brake rotor. This hub is designed to fit the FDS75 or FDS78 Front axle assembly. (commonly known as F106 front axle)
Hubs are now available with the option of having roller ball bearings installed. Roller bearings decrease the rolling resistance, which puts more horsepower to the ground. Options are available for steel or ceramic. Ceramic bearings have just 10% of the friction of steel, which provide even more power to the ground. No need to set the preload like with traditional bearings; with the roller bearings installed just slide the hub assembly on and tighten the spindle nut.
This hub is designed to accept the stock bearing, race, and seal if it's not purchased with ball bearings. (Sold Separately)
- HUB ONLY
- BILLET ALUMINUM
- FLANGE FOR BRAKE ROTOR
- 6 ON 8.75 in. B.C.
- 3/4-16 R.H. WHEEL STUD
- ACCEPTS TAPERED BEARINGS
- EACH
For Assistance or Additional Information, Contact us at 906-639-PROS (7767)
Categorized under:



