6"HI-FLOW Blackout #12 Port 60 Micron

    Part Number : 100-60 & 100-60-B
    Smallest Particles Filtered : 60 Microns
    Bypass Relief Valve : Yes
    Inlet & Outlet Fitting : #12 O-Ring Boss – 1 1/16” – 12 TPI
    Operating Temp : max 220 degrees Fahrenheit
    Operating Pressure : max 150 PSI
    Height : 3.250 in.
    Width : 6.750 in.
    Length : 7.750 in.
    Filter Weight : 5.75 pounds


To run 50 weight or lighter oil, use this 6'' high-flow see-through filter assembly with #12 ports and a 60 micron element. Extreme and Pro Mod engine combinations pushing large amounts of oil are used with supercharged Hemi vehicles.

See Through Oil Filters can be used for many applications including Racing, Marine, Automotive, Farm, and for Industrial Hydraulic Systems. These Patented Oil Filter Assemblies allow the user to visually see oil pumping through the filter, which helps to determine the condition of the oil. When oil is not being pumped through the filter it can quickly drained using an air chuck for filling tires and compressed air. A hand bicycle pump will also work. Apply a small shot of air to the air fitting on the side of the inlet opening. Oil will empty out of the assembly in seconds exposing the filter element and filtered particles, even when filtering non transparent fluids like dirty oil. The See Through top allows the user to visually inspect particles and contaminants that were filtered out of the system to determine if they are from normal use or from bearings and other components excessively wearing in the engine or machinery supplying the Filter Assembly.