4" DRY Sump See Through Filter Assembly
CLEAR VIEW FILTRATION | Part# BCS-445-115
In Stock
Highlights:
- Part Number : 445-115 & 445-115-B
- Smallest Particles Filtered : 115 Microns
- Bypass Relief Valve : No
- Inlet & Outlet Fitting : #16 O-Ring Boss – 1-5/16” – 12 TPI
- Operating Temp : max 220 degrees Fahrenheit
- Operating Pressure : max 150 PSI
- Height : 3.50 in.
- Width : 5.00 in.
- Length : 6.00 in.
- Filter Weight : 3.90 pounds
4" DRY SUMP SEE THROUGH FILTER ASSEMBLY #16 PORTS AND 115 MICRON ELEMENT
$704.95
BCS-445-115
Clear View Filtration
4" DRY SUMP SEE THROUGH FILTER ASSEMBLY #16 PORTS AND 115 MICRON ELEMENT
Part Number : 445-115 & 445-115-B
Smallest Particles Filtered : 115 Microns
Bypass Relief Valve : No
Inlet & Outlet Fitting : #16 O-Ring Boss – 1-5/16” – 12 TPI
Operating Temp : max 220 degrees Fahrenheit
Operating Pressure : max 150 PSI
Height : 3.50 in.
Width : 5.00 in.
Length : 6.00 in.
Filter Weight : 3.90 pounds
For use with all weight oils up to 70 weight, a 4'' dry-sump see-through filter assembly with #16 ports and a 115 micron element is available. designed to be placed on a #16 scavenge line between the oil tank and the Dry-sump oil pump. Additionally for situations where 50 weight oil is being used and the oil tank has a flat bottom. Particles will settle to the bottom of flat bottom tanks, as opposed to tapered bottom tanks, and may not be sucked through the pressure side of the oil pump for examination. On the pressure side between the Dry-sump oil pump and the engine inlet oil port of tapered bottom tanks, the See Through filters may be operated either with or without a screw-on disposable filter.
See Through Oil Filters can be used for many applications including Racing, Marine, Automotive, Farm, and for Industrial Hydraulic Systems. These Patented Oil Filter Assemblies allow the user to visually see oil pumping through the filter, which helps to determine the condition of the oil. When oil is not being pumped through the filter it can quickly drained using an air chuck for filling tires and compressed air. A hand bicycle pump will also work. Apply a small shot of air to the air fitting on the side of the inlet opening. Oil will empty out of the assembly in seconds exposing the filter element and filtered particles, even when filtering non transparent fluids like dirty oil. The See Through top allows the user to visually inspect particles and contaminants that were filtered out of the system without draining or leaking any fluid, unbolting or loosening any fasteners or fittings and with out any loss of oil. Seeing these filtered particles will help determine if they are from normal use or from bearings and other components excessively wearing in the engine or machinery supplying the Filter Assembly.
Clear View Filtration
4" DRY SUMP SEE THROUGH FILTER ASSEMBLY #16 PORTS AND 115 MICRON ELEMENT
Part Number : 445-115 & 445-115-B
Smallest Particles Filtered : 115 Microns
Bypass Relief Valve : No
Inlet & Outlet Fitting : #16 O-Ring Boss – 1-5/16” – 12 TPI
Operating Temp : max 220 degrees Fahrenheit
Operating Pressure : max 150 PSI
Height : 3.50 in.
Width : 5.00 in.
Length : 6.00 in.
Filter Weight : 3.90 pounds
For use with all weight oils up to 70 weight, a 4'' dry-sump see-through filter assembly with #16 ports and a 115 micron element is available. designed to be placed on a #16 scavenge line between the oil tank and the Dry-sump oil pump. Additionally for situations where 50 weight oil is being used and the oil tank has a flat bottom. Particles will settle to the bottom of flat bottom tanks, as opposed to tapered bottom tanks, and may not be sucked through the pressure side of the oil pump for examination. On the pressure side between the Dry-sump oil pump and the engine inlet oil port of tapered bottom tanks, the See Through filters may be operated either with or without a screw-on disposable filter.
See Through Oil Filters can be used for many applications including Racing, Marine, Automotive, Farm, and for Industrial Hydraulic Systems. These Patented Oil Filter Assemblies allow the user to visually see oil pumping through the filter, which helps to determine the condition of the oil. When oil is not being pumped through the filter it can quickly drained using an air chuck for filling tires and compressed air. A hand bicycle pump will also work. Apply a small shot of air to the air fitting on the side of the inlet opening. Oil will empty out of the assembly in seconds exposing the filter element and filtered particles, even when filtering non transparent fluids like dirty oil. The See Through top allows the user to visually inspect particles and contaminants that were filtered out of the system without draining or leaking any fluid, unbolting or loosening any fasteners or fittings and with out any loss of oil. Seeing these filtered particles will help determine if they are from normal use or from bearings and other components excessively wearing in the engine or machinery supplying the Filter Assembly.
Categorized under:
